Home
About Us
Products
Support
Sponsorship Promotion

Home

 

Products

 

Fork

New for 2006

F80X/100X

F80RLT/F100RLT

Float 130 R/RLC

Float 130XTT

Talas R/RLC

Talas XTT

Vanilla R/RLC

36 Talas R/RC2

36 Van R/RC2

40 R/RC2

 

Shock

Float RP3

Float R

DHX 5.0

DHX Air

Vanilla R

 

Others

Fox Technologies

Parts

Accessories

 

Support

Service Center

Warranty

 

Download

Fox Service Form

 

 

 FOX TECHNOLOGIES

 

 

TerraLogicTM – Never reach for a lockout lever again. Sound too good to be true? It's not. The F80X, F100X and FLOAT X TrailTune models feature FOX's patented TerraLogic inertia valve mechanism, which locks or firms the fork on smooth terrain and goes fully active when the trail gets rough. TerraLogic is also the only system that can filter rider-induced forces from bumps in the terrain. Hammer out the saddle and you accelerate bob-free, strike a bump and the inertia valve opens to provide the plush ride FOX Forx are known for.
 
TALASTM – TALAS is a revolutionary FOX air-spring system that allows on-the-fly external travel adjustment and a liner air spring. The TALAS system can be adjusted with a quick 90 degree sweep of the lever, setting the fork at three distinct travel positions in 20mm increment. The TALAS air-spring system automatically changes the air pressure and spring rate when the travel is adjusted so that it ensures consistent ride performance for the bike in all settings. TALAS also has an IFP and secondary air chamber which makes the air-spring curve linear so it has an exact coil-spring feel throughout the travel which provides the best bump absorption. 

 
ProPedalTM – For 30 years FOX has pushed the limits of traditional compression damping valving. This year ProPedal jumps into the future with a completely new damping technology strategy, delivering  the best and easiest to use pedaling platform available. For 2006 ProPedal technology provides  the bump absorption you want, while giving you the low speed compression damping (pedaling efficiency) you need. ProPedal will stabilize your bike against rider induced "bob" without sacrificing critical mid and high speed damping. Additionally, ProPedal's square edge bump eating performance rises to a whole new level, while incorporating even higher threshold options for the most efficiency ride possible. ProPedal is WHEREVER YOU RIDE.

TrailTuneTM - FOX took its patented TerraLogicTM inertia valve system and "Trail Tuned" it to offer just the right amount of low speed compression to filter out rider induced "bob", while offering the same FOX plush ride feel once the going gets rough. TrailTune not only increases rider efficiency, it also allows the rider to easily preload the fork for jumping, and achieve a lower sag point for improved climbing  and cornering. All of this, without handlebar gadgets or hassles. Finally, the inertia valve's bump threshold can be tuned to further refine the ride. TrailTune - the perfect tool for the trail; efficiency, lightweight and plush.

 
Boost ValveTM – Patent pending position sensitive valving Boosts internal pressures to increase damping as shaft travel increases. Increased compression damping as the shock compresses, creates a position-sensitive shock that allows efficient pedaling, ensures flawless square edge performance and provides exceptional bottom-out resistance.

 
AVATM – The compression ratio of an air-spring system compares the starting air volume of the air-spring (at full extension) to the ending air volume (shock at full bottom out). This ratio between the two volumes determines the progressivity at which the air-spring builds or, as it's sometimes called, the slope of the spring curve. The AVA system is a feature that gives the rider the ability to fine-tune the slope of the spring curve in conjunction with the air pressure adjustment to optimize suspension performance for the type of riding it will be used for.

 


Copyright © 2004 Kian Hong Cycle Pte Ltd. All Rights Reserved.